- Marmoleum and Artoleum Floor Care

Mechanical FloorCare: Spray method

For most flooring situations the Spray method is recommended, as it is the most economical. It does, however, require a rotary machine.

Advantages of the Spray method

The Spray method combines both cleaning and maintenance in one efficient, mechanical action. Regular use of Forbo Spray and a rotary machine will keep the surface of Forbo floorings in optimum condition and prolong the life of the floor. Regular buffing will further inhibit the adhesion of dirt. With consistent and regular use of the Spray method, the original satin gloss is retained, making minor distortions less visible. Due to the small amount of water used, the Spray method provides a dry environment.

The Spray method: basic actions

• After installation
• Clean with Cleaner and mop
• Pick up dirty water with wiper and mop, or wet-vac
• Rinse with clean water and mop
• Allow floor to dry
  

• Dry buff with rotary machine and buffing pad (Marmoleum only)
• Full spray or apply Spray with an applicator
• Buff with rotary machine and buffing pad

• Wipe with dust mop and dust-cloth
• Remove spots with Cleaner and damp mop

Periodical cleaning

• Spray clean with rotary machine and buffing pad
• Use Spray only where necessary

Occasional Maintenance

• Scrub with Cleaner , rotary machine and scrub pad
• Remove the dirty water with wiper and mop, or a wet-vac
• Rinse with clean water and mop
• Allow floor to dry
• Start the Spray method
• Dry buff with rotary machine and buffing pad (Marmoleum only)
• Full spray or apply Spray with an applicator
• Buff with rotary machine and buffing pad